*********************************************************************************
                            GK5CN EC RELEASE NOTE

*********************************************************************************
---------------------------------------------------------------------------------
2018/5/18                      EC Version 1.19.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.sync code 2018/5/17 "Update 2nd ME KB modified Fn+Insert"
2.fixed light bar have no welcome light when power saving mode
3.modifed 2nd ME KB drop speed
4.code downsizing

Note:
     Release Formal version "GK5CN 1.19.09" for Standard
     Release sub version    "GK5CN 1.19.39" for Haier

---------------------------------------------------------------------------------
2018/5/10                      EC Version 1.18.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.fixed welcome light will be off at restart

Note:
     Release Formal version "GK5CN 1.18.09" for Standard
     Release sub version    "GK5CN 1.18.39" for Haier


---------------------------------------------------------------------------------
2018/5/8                      EC Version 1.17.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.modified QKEY behavior

Note:
     Release Formal version "GK5CN 1.17.09" for Standard
     Release sub version    "GK5CN 1.17.39" for Haier

---------------------------------------------------------------------------------
2018/5/8                      EC Version 1.16.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.system will return to default mode when reboot or power on.
2.add fan table at business machine
3.QKey is changed gaming or office mode at business machine
4.No thermal patch at business machine
5.modified protect and release temperature at office mode at business machine
6.changed battery 4S1P ivan rule setting as 3S1P
7.modified office fan table rule at business machine

Note:
     Release Formal version "GK5CN 1.16.09" for Standard
     Release sub version    "GK5CN 1.16.39" for Haier
---------------------------------------------------------------------------------
2018/4/27                      EC Version 1.15.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.modified ivan rule
2.modified user mode release temperature
3.modified user mode will keep 35w(Pl1/PL2)
4.modified fan is smooth at user mode
5.modifed fan duty at user mode

Note:
     Release Formal version "GK5CN 1.15.09" for Standard
     Release sub version    "GK5CN 1.15.39" for Haier

---------------------------------------------------------------------------------
2018/4/25                      EC Version 1.14.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. modified thermal patch
2. Fix S4/resume show Caps Lock OSD issue.

Note:
     Release Formal version "GK5CN 1.14.09" for Standard
     Release sub version    "GK5CN 1.14.39" for Haier

---------------------------------------------------------------------------------
2018/4/20                      EC Version 1.13.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. modified fan user PL2 again
2. modified Myfan2 CPU releasing temperature again

Note:
     Release Formal version "GK5CN 1.13.09" for Standard
     Release sub version    "GK5CN 1.13.39" for Haier


---------------------------------------------------------------------------------
2018/4/20                      EC Version 1.12.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. Add fan user mode will adjust PL1/PL2
2. modified thermal test mode
3. modified Myfan2 CPU releasing temperature

Note:
     Release Formal version "GK5CN 1.12.09" for Standard
     Release sub version    "GK5CN 1.12.39" for Haier

---------------------------------------------------------------------------------
2018/4/19                      EC Version 1.11.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. Add "ECVER" signature for BIOS dentify EC bin file version

Note:
     Release Formal version "GK5CN 1.11.09" for Standard
     Release sub version    "GK5CN 1.11.39" for Haier

---------------------------------------------------------------------------------
2018/4/19                      EC Version 1.10.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. remove "add Yantao rule at warm boot@AC mode"

Note:
     Release Formal version "GK5CN 1.10.09" for Standard
     Release sub version    "GK5CN 1.10.39" for Haier

---------------------------------------------------------------------------------
2018/4/19                      EC Version 1.09.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. modified ivan rule 
2. fix fan noise when trigger thermal patch
3. modified SMBUS
4. add Yantao rule at warm boot@AC mode

Note:
     Release Formal version "GK5CN 1.09.09" for Standard
     Release sub version    "GK5CN 1.09.39" for Haier

---------------------------------------------------------------------------------
2018/4/12                      EC Version 1.08.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.fixed power LED not breath at S3 mode

Note:
     Release Formal version "GK5CN 1.08.09" for Standard
     Release sub version    "GK5CN 1.08.39" for Haier



---------------------------------------------------------------------------------
2018/4/12                      EC Version 1.08.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.fixed power LED not breath at S3 mode

Note:
     Release Formal version "GK5CN 1.08.09" for Standard
     Release sub version    "GK5CN 1.08.39" for Haier
---------------------------------------------------------------------------------
2018/4/12                      EC Version 1.07.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.Add EC update "Tim AP warning function"
2.modified Haier Light bar breath mode (speed, brightness)
3.add Fn+HOME: SysRq
4.add FN+END: ScrLK
5.add Fn+1:fan boost for Haier
6.add Fn+2:turn on/off Light Bar for Haier
7.add Japanese KB "change/not change"
8.modified solution "plug out HDMI cable not send Q76"
9.add EC update "support thermal test mode"
10.modified 51 thermal patch
11.fixed 61 power LED not turn on when resume

Note:
     Release Formal version "GK5CN 1.07.09" for Standard
     Release sub version    "GK5CN 1.07.39" for Haier

---------------------------------------------------------------------------------
2018/3/30                      EC Version 1.06.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. Fix charging finish not turn off charging LED at 61 project
2. Fix Pixart TP can't change status in Korean OS.
3. modified compensate of battery

Note:
     Release Formal version "GK5CN 1.06.09" for Standard
     Release sub version    "GK5CN 1.06.39" for Haier
---------------------------------------------------------------------------------
2018/3/30                      EC Version 1.05.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. Fix S3 LED behavior at 61 project

Note:
     Release Formal version "GK5CN 1.05.09" for Standard
     Release sub version    "GK5CN 1.05.39" for Haier


---------------------------------------------------------------------------------
2018/3/28                      EC Version 1.04.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1. Fix S4 resume show Numlock OSD issue.
2. modified full charge LED rule
3. modified fully charge current tolerance to 600mA+20min

Note:
     Release Formal version "GK5CN 1.04.09" for Standard
     Release sub version    "GK5CN 1.04.39" for Haier
---------------------------------------------------------------------------------
2018/3/26                      EC Version 1.03.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
1.for HW required, 5z follow Yantao rule at restart
2.for HW required, modified EDP sequence again
3.enhanced kb transfer framework
4.discussed with thermal, remove "Release Throttling Delay 10sec"
5.fix "RGB light bar power saving mode not support welcome mode"
6.adjust 5z/6z/61 Ivan rule table
7.enhanced to turn on kb back lite at resume or boot on
8.modified battery mode power consumption at S3
9.delete some useless GPIO setting
10.modfified one key no output at Japanese kb
11.remove to monitor EC 0x1304 bit0 whether be hi or low

Note:
     Release Formal version "GK5CN 1.03.09" for Standard
     Release sub version    "GK5CN 1.03.39" for Haier
---------------------------------------------------------------------------------
2018/3/20                      EC Version 1.02.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_10.209
1.for Thermal team required, modified 5z thermal patch

Note:
     Release Formal version "GK5CN 1.02.09" for Standard
     Release sub version    "GK5CN 1.02.39" for Haier

---------------------------------------------------------------------------------
2018/3/19                      EC Version 1.01.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_10.109
1.modified battery SMBUS sequence again

Note:
     Release Formal version "GK5CN 1.01.09" for Standard
     Release sub version    "GK5CN 1.01.39" for Haier

---------------------------------------------------------------------------------
2018/3/19                      EC Version 1.00.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_10.009
1.solution for Zero I is irregular
2.modified 5z/6z ivan rule
3.for HW required, enhanced to turn off LVDS power at s3/s4
4.modified charging timeout,charging LED not change
5.modified fully charge  current tolerance
6.modified battery SMBUS sequence
7.enhance 6z throttle mechanism at restart
8.code downsizing
9.for HW required, be able to read MPS version

Note:
     Release Formal version "GK5CN 1.00.09" for Standard
     Release sub version    "GK5CN 1.00.39" for Haier
---------------------------------------------------------------------------------
2018/3/14                      EC Version 0.27.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_02.709
1.fix 10709/10777/10873:󧨻~
2.for Sir required, change light bar level from s3 resume
3.verified MPS chipset updating function, currently is disable
4.enhanced fn+f2 will have debounce time

Note:
     Release Formal version "GK5CN 0.27.09" for Standard
     Release sub version    "GK5CN 0.27.39" for Haier

---------------------------------------------------------------------------------
2018/3/13                      EC Version 0.26.09                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_02.609
1.for HW required, modified when throttle,PL4 change to 70w at AC mode for 5z project
2.Add shorten solution for Wlan abnormal after S3 S4.
3.press fn+f2 will send 0xa5 virtual scan code to AP
4.fix VGA can't shutdown can't throttle
5.for thermal team required, support_New_Fan_rule
6.modified thermal table
7.for HW required, add mechanism at restart for 6z/61 project
8.fix bug id 10929: '\' key is enter behavior

Note:
     Release Formal version "GK5CN 0.26.09" for Standard
     Release sub version    "GK5CN 0.26.39" for Haier

---------------------------------------------------------------------------------
2018/3/8                      EC Version 0.25.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_02.500
1.Support AP turn on power_usb function
2.Add EC update 20180301_2nd Generation ME Keyboard_Support PCBA v1.4(Update02 for KeyboardID)
3.Add EC update 20180305_EC debugIO set to 6E6F
4.add the flag of touchpad is ps2 or iic 
5.delete a invalid gpio and fixed LVDS_VIN abnormally at power off because PCH electric leakage
6.add fan not boost after s4 return to s0, if fan boost is set
7.Support AP turn on power_usb function
8.code downsizing
9.delete ZeroI limitation
10.support Japanese 2nd keyboard

Note:
     Release Formal version "GK5CN 0.25.00" for Standard
     Release sub version    "GK5CN 0.25.30" for Haier

---------------------------------------------------------------------------------
2018/3/1                      EC Version 0.24.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_02.400
1.modified fan boost when s4 return to s0
2.adjust 4z/5z/6z ivan rule parameter
3.disable 0.23.00 "reset LPC when boot on"
Note:
     Release Formal version "GK5CN 0.24.00" for Standard
     Release sub version    "GK5CN 0.24.30" for Haier

---------------------------------------------------------------------------------
2018/2/22                      EC Version 0.23.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_02.300
1.for thermal team required, 4z/5z PL1 changed to 45w at thermal patch.
2.adjust 4z/5z ivan rule parameter
3.reset LPC when boot on
Note:
     Release Formal version "GK5CN 0.23.00" for Standard
     Release sub version    "GK5CN 0.23.30" for Haier

---------------------------------------------------------------------------------
2018/2/10                      EC Version 0.22.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_02.200
1.for HW GPIO changed, A_Cover_PWM_LED from GPA7 to GPJ2
2.support MyFan2
3.support TP TDA9860 8pin
4.fix issue for after press f3/f4 key at startup menu, sometimes system not boot on
5.set aside a bit of code
6.Add EC update 20180129_2nd Generation ME Keyboard_Support PCBA v1.4 update 01
Note:
     Release Formal version "GK5CN 0.22.00" for Standard
     Release sub version    "GK5CN 0.22.30" for Haier
---------------------------------------------------------------------------------
2018/2/5                      EC Version 0.21.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_02.100
1.enable WA3081
2.for pixart required,TP GPIO set Input
3.adjust 4z/5z ivan rule parameter
4.when Fanboost closed,drop to thermal table directly.Not smooth.
5.for 6Z EE required, add power noise GPIO

---------------------------------------------------------------------------------
2018/1/25                      EC Version 0.14.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_01.400
1.for thermal required, update 5Z thermal patch
2.code modified for FanBoost and UserFan control flag

---------------------------------------------------------------------------------
2018/1/24                      EC Version 0.13.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_01.300
1.modified 61/67 daughter board LED definition.
2.disable LDN05 

Note:
     Release Formal version "GK5CN 0.13.00" for Standard
     Release sub version    "GK5CN 0.13.30" for Haier

---------------------------------------------------------------------------------
2018/1/22                      EC Version 0.12.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_01.200
1.fix the issue for after resume, Light bar will be darkly sometimes.
2.Add SMBus error bit patch code
3.Modify Ivan rule
4.modified thermal table for 5Z/6Z
5.Modify power on sequence(PM_RSMRST#/SCI)
6.Update Keyboard ID & scancode 500us for 2nd ME keyboard
7.for power team required, adjust battery percent for Ivan rule at 4z/5z

Note:
     Release Formal version "GK5CN 0.12.00" for Standard
     Release sub version    "GK5CN 0.12.30" for Haier
---------------------------------------------------------------------------------
2018/1/16                      EC Version 0.11.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_01.100
1.modified RGB Light bar
2.for HW required, MEKB power always set high
3.modified LED GPIO for 61 project
4.4z/5z ADP defulat set 120w,6z ADP default set 150w
5.add on key press function
6.support Ivan rule2 throttling mechanism
7.co-work with BIOS for ADP re-define
8.Support ME unlock
9.power sequence add timeout mechanism

Note:
     Release Formal version "GK5CN 0.11.00" for Standard
     Release sub version    "GK5CN 0.11.30" for Haier
---------------------------------------------------------------------------------
2017/12/13                      EC Version 0.10.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_01.000
1.support Light Bar
2.add Caps LED on/off
3.modified fan table
4.modified fan from PWM rule
5.add GNKeyboard power at S3 mode
6.for HW required, fine tune power sequence
7.modified GPIO for 61 project
8. adjust GNLѧOq


---------------------------------------------------------------------------------
2017/11/22                      EC Version 0.02.00                      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_00.200
1.battery spec 1.2 modified
2.change fan1 and fan2
3.support Pixart toggle key function
4.modified APC watts
5.support Optical Keyboard
6.follow GE project for eDP panel sequence BL_ON delay 2000ms only for S3
7.co-worked with HW for power sequence
8.support fan boost
9.Add ϥ|ϨSAPEC10LI Function
10.modified device status.
---------------------------------------------------------------------------------
2017/10/12    		     EC Version 0.01.00		      Owner: Mike Tsai
---------------------------------------------------------------------------------
File name: GK5CN_00.100
1.First release for A SMT
